Freud UP201 Raised Panel Shaper Cutter For 5/8-Inch Stock 1-1/4 Bore

[Shop Now !!!]

Freud's exclusive 2+2 Raised Panel Cutters produce raised panels that are glass smooth even on cross grains and never have the bothersome fine splinters at the top edge of the profile. Two main wings form the majority of the profile while two smaller cutters with a negative shear angle smooth the vertical part of the profile to eliminate fuzzing. These cutters form a 1/4-inch tongue in 5/8-inch-inch stock or can be used with the UP230 or UP231 back cutters for 3/4-inch-inch stock. 5-1/2 inch diameter 5/8 carbide height. Covered by Freud's limited lifetime warranty.Thick micrograin carbide tipsKickback reducing designCovered by Freud's limited lifetime warranty

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud DE-1000 Insert Knife One Piece Door Edge Profile Shaper Cutter Head 1-1/4 Bore

[Shop Now !!!]

This 1-1/4 inch bore insert cutter head accepts six different profile knife sets to form decorative door edge profiles that have an integrated finger pull. Available knife sets are: DE-A DE-B DE-C DE-D DE-E and DE-F. Covered by Freud's limited lifetime warranty.Thick micrograin carbide tipsKickback reducing designCovered by Freud's limited lifetime warranty

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-274 1-3/4” Stock Rail & Stile Shaper Cutter Set

[Shop Now !!!]

• Thick micrograin carbide tips


• Kickback reducing design


• Male & female cutter sets cut a bead pattern on both sides of the rail and stile--ideal for exterior doors


• Shims are included to allow you to maintain perfect joints through many sharpenings


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DELTA 43-807 3/4-Inch Spindle for Wood Shapers

[Shop Now !!!]

[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC HSG-2064 Mobile Base For Powermatic 64 64-A 63 Table Saw & General 50-175 50-185

[Shop Now !!!]

• Fits Powermatic 64 64-A 63 and General 50-175/185


• 2 rigid wheels 1 swivel wheel


• Raises machine 3/4-inch off floor


• Brake knobs to set brake on the two rigid wheels


• Heavy gauge steel full welded for strength powder coat finish

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC HSG-2064 Mobile Base For Powermatic 64 64-A 63 Table Saw & General 50-175 50-185

[Shop Now !!!]

• Fits Powermatic 64 64-A 63 and General 50-175/185


• 2 rigid wheels 1 swivel wheel


• Raises machine 3/4-inch off floor


• Brake knobs to set brake on the two rigid wheels


• Heavy gauge steel full welded for strength powder coat finish

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-005 Roman Ogee Shaper Cutter 3/4 Bore

[Shop Now !!!]

The Freud EC005 Roman Ogee Cutter has a 2-7/8" cut all dia. with carbide height 25/32" minor height of 9/32" large radius of 15/64" and a bore dia. of 3/4" and is Carbide Tipped for long wear and accurate cut.

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-263 Classical Profile Shaper Cutter Set For 3/4-Inch Rail And Stile Doors - 3/4 Bore

[Shop Now !!!]

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Grizzly G0510Z 3/4 HP Shaper

[Shop Now !!!]

Many times over the years customers have asked us to produce a quality shaper at a bargain price. That may be impossible for others but not for Grizzly! Our G0510Z has plenty of power with its 3/4 HP motor. Its surface ground cast iron table is both durable & slippery smooth while the cast iron fence with wood facing allows for easy & precise adjustments. But best of all this is a real shaper with a 1/2" spindle & it accepts 1/4" & 1/2" router bits. Equipped with a spindle lock & reversing switch just like the big boys. Put away your router & start shaping today! Features: ? Independently Adjustable Fence ? Push button ON/OFF Switch ? Includes Miter Gauge & Starting Pins ? Precision Ground Cast Iron Table ? Cast Iron Body Construction ? Pre-formed Steel Stand ? Shielded & Permanently Lubricated Spindle Bearings ? Split Cast Iron Fence Assembly with Wood Faces for Offset Profile Shaping ? Reversing switch Specifications: ? Motor Size: 3/4 HP 110V 10 AMP ? Spindle Diameter: 1/2" ? Spindle Length: 3" ? Spindle Travel: 7/8" ? Spindle Capacity Under Nut: 2-3/8" ? Spindle Speed: 8900 RPM ? Table Counterbore 3" Dia. x 5/16" Deep ? Table Size: 15-5/8" x 17-3/4" ? Table Height: 34-1/4" ? Overall Height (Includes Fence): 37" ? Overall Depth: 23-1/4" ? Overall Width: 26-1/4" ? Shipping Weight: 172 lbs.[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-261 Ogee Profile Shaper Cutter Set For 3/4-Inch Rail And Stile Doors - 3/4 Bore

Overall Diameter (D) Cut Depth (C) Carbide Height (H) Tenon Thickness (T) Tenon Length (L) Large Radius (R1) Small Radius (R2) Bore Diameter 2-11/16 11/32 1 15/64 7/16 9/32 11/64 3/4

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud RP1000 Insert Knife Raised Panel Shaper Cutter Head 1-1/4 Bore

orm an ce S ys tem ® C u tt e rs Freud now has a revolutionary system for making cabinet doors. This system combines the flexibility of standard insert tooling with the performance of resharpenable TiCoTM Hi-Density Carbide knives. This gives cabinet manufacturers the ability to offer over 10 different styles of raised panels for cabinet doors at a fraction of the cost of fixed knife cutters. Plus these cutters have a specially designed raised panel knife that will leave cross grain cuts as smooth and splinter-free as cuts with the grain. The head is manufactured out of a high grade aircraft aluminum so weight is kept to a minimum while strength is maintained. The Anti- Kickback Design of the head reduces the likelihood of kickbacks. The basic system RP1000 consists of the cutter head only. Profile knives can be purchased separately. The RP2000 contains the cutter head straight profile back cutter RP-OPS and 5 sets of profile knives for 5/8" stock and 3/4" stock when using the back cutter. Both sets are packaged in a sturdy case for convenient storage. This raised panel cutter system can be used either with the Performance System®Rail and Stile cutter or with standard fixed wing rail and stile cutters.

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-146 3-Wing 1-Inch Straight Edge Shaper Cutter 3/4 Bore

Overall Diameter Carbide Height(H) Bore Diameter(D) 2-7/8 1 3/4

• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud EC-034 Lock Miter Shaper Cutter 3/4 Bore

The Freud EC034 Lock Miter Cutter is designed to make lock miter joints with ease. All you need to do is run one board vertically and the mating piece horizontally. 4-5/32 inch inch diameter 1-5/32-inch carbide height. Covered by Freud's limited lifetime warranty.Specifically designed for making lock miter jointsThick micrograin carbide tips for enduring sharpness and durabilityAnti-kickback design for less operator fatigue and a smoother workpieceTakes the work out of making defined cornersCovered by Freud's limited lifetime warranty

• Specifically designed for making lock miter joints


• Thick micrograin carbide tips for enduring sharpness and durability


• Anti-kickback design for less operator fatigue and a smoother workpiece


• Takes the work out of making defined corners


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

DELTA 43-800 Router Bit Chuck for Shapers

[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9036 Tool Saver Machine Cover Small 27-Inch x 36-Inch

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• 27" X 36" Ideal for bench top tools


• Rugged cotton sheathing with plasticol coating


• Breathable yet water resistent


• Rolled hem with rubberized magnets on each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud RS2000 Insert Knife Rail And Stile Shaper Cutter Set 1-1/4 Bore

RS2000 Set Contents Cutter Head(RS-S)- 1-1/4" Bore Diameter 4-7/16" Overall Diameter Cutter Head(RS-R)- 1-1/4" Bore Diameter 4-7/16" Overall Diameter Groover knives(RS-K**) Profile Knives(RS-L*) Profile Knives(RS-A) Profile Knives(RS-B) Profile Knives(RS-C) Profile Knives(RS-D) Profile Knives(RS-E) Profile Knives(RS-F) Profile Knives(RS-G) Profile Knives(RS-H) Profile Knives(RS-I)

• Set consists of two insert cutter heads which accept carbide insert knives


• Eighteen different looks and the cost savings of resharpenable knives


• Thick micrograin carbide tips


• Kickback reducing design


• Covered by Freud's limited lifetime warranty

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9072 Tool Saver 56-by-72-Inch Large Machine Cover

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• Large Machine Cover protects against rust harmful moisture dust and other workshop elements


• Made of rugged cotton sheeting with a special plastisol


• Fabric roll-hemmed around the entire perimeter


• Rubberized magnet sewn to each corner


• Roll hem with rubberized magnets on each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9112 Tool Saver 72-by-112-Inch Jumbo Machine Cover

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• Large Machine Cover protects against rust harmful moisture dust and other workshop elements


• Made of rugged cotton sheeting with a special plastisol


• Fabric roll-hemmed around the entire perimeter


• Rubberized magnet sewn to each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

HTC TS-9056 Tool Saver Machine Cover Medium (36-Inch x 56-Inch)

Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house but are sized for woodworkers.

• Measures 36 by 36 inches ideal for scrollsaws short bed jointers


• Rugged cotton sheeting with plastisol coating


• Breathable yet water resistant


• Roll hem with rubberized magnets on each corner

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud FI102 Replacement 4-Inch 8 Tooth Blade For Freud And Other Biscuit Joiners

Freud biscuit joiner replacement blade.

• Replacement blade for the JS100 or JS102 joiner


• Eight tooth replacement blade


• Kickback Reducing Design


• Covered by Freud's limited lifetime warranty

More detail ...

Flexcut DRAW KNIFE

The Flexcut draw knife has 5 inches of cutting edge. It is designed to flex around curves where large amounts of stock need to be removed. The curved edge gives a skew-like cutting action for a low resistance cut. This tool works very well for roughing out decoys birds and fish. It also works great for bark and wood removal on walking sticks. Made in the USA with the quality you have come to expect from Flexcut.[]More detail ...

Freud DE32-H Profile Knife Set For Freud DE320-T Door Edge Cutter

• Resharpenable micrograin carbide insert knives
• Covered by Freud's limited lifetime warranty